Processor and graphics card specifications are live

Graphics cards/Comparison

13 specifications

NVIDIA GeForce RTX 5050 vs AMD Radeon RX 6500 XT 8GB

On paper, the NVIDIA GeForce RTX 5050 has more shading units, and the NVIDIA GeForce RTX 5050 has a wider memory bus. Specifications describe what each card is designed to do; how much of that either one holds under continuous load is a separate question.

NVIDIA GeForce RTX 5050 compared with AMD Radeon RX 6500 XT 8GB, specification by specification
12 specifications · 3 with a higher side

NVIDIA GeForce RTX 5050

NVIDIA · GeForce RTX 50 · Desktop

AMD Radeon RX 6500 XT 8GB

AMD · Radeon RX 6000 · Desktop

Compute

Architecture
Blackwell
Not verified
Shading units
2,560 (higher on this specification)
1,024
Base clock
2310 MHz
Not verified
Boost clock
2570 MHz
2815 MHz (higher on this specification)
Game clock
Not verified
2650 MHz
Compute units
Not verified
16

Memory

Memory
8 GB
8 GB
Memory type
GDDR6
GDDR6
Memory bus
128-bit (higher on this specification)
64-bit

Power and platform

TDP
130 W
113 W
Process
Not verified
Not verified
Launched
2025-07
2022-01-19

A check marks the higher figure only on rows where higher is unambiguously better. Rows without one are not ties; they are specifications where “better” has no meaning.

Reading the table

What the difference means.

3 years apart

The RTX 5050 (Blackwell, 2025) is 3 years newer than the RX 6500 XT 8GB (Radeon RX 6000, 2022). A newer architecture brings more than speed: newer video encoders and decoders, newer upscaling and frame generation, and a longer run of driver updates ahead of it.

Video memory

Both carry 8 GB, so neither has the advantage where memory is the limit: high resolutions, heavy textures and local AI models fill both at the same point.

Memory bus

The RTX 5050 moves data over a 128-bit bus of GDDR6; the RX 6500 XT 8GB uses 64-bit GDDR6. The bus width and the memory type together set how fast the chip can reach its own memory, which shows at high resolutions where every frame moves more data. A narrow bus with fast memory can match a wide one with slow memory, so neither figure settles it alone.

Shading units

The counts differ, 2,560 against 1,024, but these are different designs from different makers, and a shading unit on one is not the same amount of work as on the other. The row cannot be used to rank this pair.

Board power

The RTX 5050 draws up to 130 W against 113 W. That is heat the case has to exhaust and current the power supply has to deliver: allow a supply of about 500 W for the RTX 5050 with a typical processor, and check the card's power connectors against the supply's. A card that cannot shed its heat does not fail. It lowers its clocks after a few minutes, which is the frame rate that falls the longer you play.

Which to pick, on paper

A small case or a modest power supply
RX 6500 XT 8GB
113 W against 130 W: less heat, fewer power connectors, quieter fans.

What no table says

How much of its speed a graphics card keeps after the first minute depends on the cooling and the power limit of the machine it is in. If you own one of these, measure it: the test is free and runs in this browser.

Questions

Is the RTX 5050 better than the RX 6500 XT 8GB?
By need, on the specifications: a small case or a modest power supply: the RX 6500 XT 8GB. They are different designs, so the raw counts cannot rank them. Frame rates depend on the game and its settings, and how much speed either card keeps after ten minutes depends on its cooling, which is what a sustained test measures.
What power supply does the RTX 5050 need?
Allow about 500 W with a typical processor, and make sure the supply has the power connectors the card uses. The RX 6500 XT 8GB at 113 W is easier on both.

Every figure on this table is a design target. None of it is a measurement.

Nothing above describes how a graphics card behaves twenty minutes into a sustained workload, which is where two chips with nearly identical specifications routinely diverge. A boost clock is a ceiling the vendor permits, not a rate the chip sustains, and whether it holds depends on the cooling, the case, the power profile and the room. None of those appear on a specification sheet.

We deliberately do not reduce these figures to a single score. A composite invented from specifications would look authoritative and measure nothing, and choosing the weights would be choosing the winner.