Processor and graphics card specifications are live

Graphics cards/Comparison

13 specifications

NVIDIA GeForce RTX 4070 Ti SUPER vs NVIDIA GeForce RTX 5070 Ti

On paper, the NVIDIA GeForce RTX 5070 Ti has more shading units. Shading-unit counts are not directly comparable across different architectures, so read that row as context rather than a verdict. Specifications describe what each card is designed to do; how much of that either one holds under continuous load is a separate question.

NVIDIA GeForce RTX 4070 Ti SUPER compared with NVIDIA GeForce RTX 5070 Ti, specification by specification
10 specifications · 3 with a higher side

NVIDIA GeForce RTX 4070 Ti SUPER

NVIDIA · GeForce RTX 40 · Desktop

NVIDIA GeForce RTX 5070 Ti

NVIDIA · GeForce RTX 50 · Desktop

Compute

Architecture
Ada Lovelace
Blackwell
Shading units
8,448
8,960 (higher on this specification)
Base clock
2340 MHz (higher on this specification)
2300 MHz
Boost clock
2610 MHz (higher on this specification)
2450 MHz

Memory

Memory
16 GB
16 GB
Memory type
GDDR6X
GDDR7
Memory bus
256-bit
256-bit

Power and platform

TDP
285 W
300 W
Process
Not verified
Not verified
Launched
2024-01-24
2025-02-20

A check marks the higher figure only on rows where higher is unambiguously better. Rows without one are not ties; they are specifications where “better” has no meaning.

Reading the table

What the difference means.

A year apart

The RTX 5070 Ti (Blackwell, 2025) is a year newer than the RTX 4070 Ti SUPER (Ada Lovelace, 2024). A newer architecture brings more than speed: newer video encoders and decoders, newer upscaling and frame generation, and a longer run of driver updates ahead of it.

Video memory

Both carry 16 GB, so neither has the advantage where memory is the limit: high resolutions, heavy textures and local AI models fill both at the same point.

Memory bus

The RTX 4070 Ti SUPER moves data over a 256-bit bus of GDDR6X; the RTX 5070 Ti uses 256-bit GDDR7. The bus width and the memory type together set how fast the chip can reach its own memory, which shows at high resolutions where every frame moves more data. A narrow bus with fast memory can match a wide one with slow memory, so neither figure settles it alone.

Shading units

The counts differ, 8,960 against 8,448, but these are different designs, and a shading unit on one is not the same amount of work as on the other. The row cannot be used to rank this pair.

Board power

The RTX 5070 Ti draws up to 300 W against 285 W. That is heat the case has to exhaust and current the power supply has to deliver: allow a supply of about 750 W for the RTX 5070 Ti with a typical processor, and check the card's power connectors against the supply's. A card that cannot shed its heat does not fail. It lowers its clocks after a few minutes, which is the frame rate that falls the longer you play.

Which to pick, on paper

A small case or a modest power supply
RTX 4070 Ti SUPER
285 W against 300 W: less heat, fewer power connectors, quieter fans.

What no table says

How much of its speed a graphics card keeps after the first minute depends on the cooling and the power limit of the machine it is in. If you own one of these, measure it: the test is free and runs in this browser.

Questions

Is the RTX 4070 Ti SUPER better than the RTX 5070 Ti?
By need, on the specifications: a small case or a modest power supply: the RTX 4070 Ti SUPER. They are different designs, so the raw counts cannot rank them. Frame rates depend on the game and its settings, and how much speed either card keeps after ten minutes depends on its cooling, which is what a sustained test measures.
What power supply does the RTX 5070 Ti need?
Allow about 750 W with a typical processor, and make sure the supply has the power connectors the card uses. The RTX 4070 Ti SUPER at 285 W is easier on both.

Every figure on this table is a design target. None of it is a measurement.

Nothing above describes how a graphics card behaves twenty minutes into a sustained workload, which is where two chips with nearly identical specifications routinely diverge. A boost clock is a ceiling the vendor permits, not a rate the chip sustains, and whether it holds depends on the cooling, the case, the power profile and the room. None of those appear on a specification sheet.

We deliberately do not reduce these figures to a single score. A composite invented from specifications would look authoritative and measure nothing, and choosing the weights would be choosing the winner.